Automatic Transmission Fluid X-changer

Automatic Transmission Fluid X-changer Model : ATF-20DT

inquiry

This product adopts an automatic flow direction control device and a coordinate adjustment system.
It equips an "oil circulation flow rate" window.
It relies on the transmission itself and the switch to change oil and automatically switches oil absorption after the oil change.

It can protect the automatic transmission most effectively, ensure the same amount of exchange.
It can remove the sludge and metal shavings in the transmission.

Technical Parameter

Pneumatic / Electric:DC 12V

Working pressure:0-60PSI

Weight:38kg

Size mm: 365*445*940

How should I connect the device to the car?: First, you need to confirm the position of the car gearbox interface. Then select the appropriate connector according to the brand and model of the car. Install the connector on the inlet and return oil pipes of our equipment, and then connect them to the vehicle.
Our model ATF7800/9800/919 has equipped the latest database to help you choose the suitable adapter and will suggest a recommended exchange amount.

How should I distinguish the inlet/ outlet interface of each car?: Distinguishing the inlet and outlet interface can be difficult for users without experience exchanging the gearbox oil.
Our model ATF 6800/7800/9800/919 can automatically figure the inlet and outlet port. All you need to do is connect the pipe to the vehicle, do not worry about the direction.
If you are confident with the essential operation, you can try our manual model ATF 20DT, a straightforward and durable product.

Do I need to clean/wash the gearbox before exchanging the oil?: Yes. But don't worry, all our equipment has the function of circulating cleaning. Our machines use the pressure to maximize the circulating cleaning of the entire gearbox—even the inside of the gearbox that is generally difficult to reach. Not wasting any new oil. Making everything efficient and environmentally friendly.

What’s the power of the machine?: The standard configuration of our ATF equipment is 12V or 220V. The 12V uses the power clip to connect to the car battery, / The 220V uses the plug-in power supply. We can also make 110V / 230V or 60HZ equipment according to your needs. Don't hesitate to contact us when you place an order and confirm your voltage requirements.

Do I need to lift the car when using the machine?: Depending on the situation, if your car's transmission needs to connect from the bottom of the vehicle, it will require you to lift the device with a lift to operate.

ATF-919

ATF-7800

ATF-6800